Skip to content
Curtin University of Technology
Research & Development

Publications in year 2010

Publications in Journals:

  1. Alappatt, M., 2010.  Progress billing method of accounting for long-term construction contracts, Journal of Modern Accounting and Auditing, Vol. 6, No. 11, pp. 41-47.
  2. Aruchunan, E., and Sulaiman, J., Numerical Solution of Second-Order Linear Fredholm Integro-Differential Equation Using Generalized Minimal Residual (GMRES) Method. American Journal of Applied Sciences, Science Publication, Vol. 7, No. 6, pp. 780-783.
  3. Athapaththu, A.M.R.G., Kumara M.A.C, Gamage E.G.Y.R, Nimalasena K.P.N.S , 2010.  Guinea grass as a technical solution for stabilisation of slopes in Sri Lankan roadways, Journal of Institute for Construction Training and Development (ICTAD), Vol 8, Section 1, pp. 8-13.
  4. Barsoum, N., 2010.  Implementation of a higher quality DC power converter, Journal of Electromagnetic Analysis and Application (JEMAA), Vol. 2, No. 2.
  5. Barsoum, N., 2010.  Speed control of the induction drive by temperature and light sensors via PIC, Global Journal of Technology and Optimization GJTO., Vol.1, pp. 53 – 59.
  6. Barsoum, N., and Vasant, P. 2010.  Simplified solar tracking prototype, Global Journal of Technology and Optimization GJTO., Vol. 1, pp. 38 – 45.
  7. Chan, K.M., 2010.  Harley Davidson Inc. – a case in international accrual accounting analysis on the risk, profitability and/or cash flow from estimation and management discretion, International Journal of Managerial and Financial Accounting, Vol. 2, No. 4, pp. 401-430.
  8. Chua, H.B., 2010.  Minimum and complete fluidization velocity for sand-palm shell mixtures, part II: characteristic velocity profiles, critical loading and binary correlations, American Journal of Applied Sciences, Vol. 7, No. 6, pp. 773-779.
  9. Chua, H.B., 2010.  Minimum and complete fluidization velocity for sand-palm shell mixtures, part I: fluidization behaviour and characteristic velocities, American Journal of Applied Sciences, Vol. 7, No. 6, pp. 763-772.
  10. Debnath, S., 2010.  Effect of different uniform temperature with thickness-wise linear temperature gradient interfacial stresses of a bi-material assembly, American Journal of Applied Science, Vol. 7, No. 6, pp. 829-834
  11. Debnath, S., 2010.  Improved tri-layered interfacial stress model with the effect of different temperatures in the layers, Archive of Applied Mechanics, Springer, Berlin / Heidelberg (published online 9 May 2010)
  12. Ghosh, U, K., 2010.  Pervaporative separation of furfural from aqueous solution ujsing modified polyurethaneurea membrane, Desalination, Vol. 252, No. 1-3, pp. 1-7.
  13. Goh, S.M., 2010.  On the effect of tastant excluded fillers on sweetness and saltiness of a model food, Journal of Food Science, Journal of Food Science, Vol. 75, No. 4, pp. 245-249.
  14. Goh, S.M., 2010.  Tribological measurements of foods using a rheometer.  Food Research International, Vol.43, pp 183-186.
  15. Goi, C.L., 2010.  Graduates employment: Valuable of Curtin University of Technology Sarawak Graduates., International Journal of Marketing Studies, Vol. 2, No. 1, pp. 127 - 132.
  16. Goi, C.L., 2010.  Web site accessibility and web site development in Malaysia, Journal of Applied Sciences, Vol. 10, No. 23, pp. 2954-2966.
  17. Goi, C.L., 2010.  Web sites for e-banking: A study of web sites performance in Malaysia, International Journal of Business Research, Vol. 10, No. 2, pp. 190-204.
  18. Kumar, R., and Singh, A.K., 2010.  Web structure mining: exploring hyperlinks and algorithms for information retrieval, American Journal of Applied Sciences, Vol. 7, pp. 840 – 845.
  19. Low, S.Y., 2010.  A new hybrid descent method with application to the optimal design of finite precision FIR filters, Optimization Methods and Software, Vol.  25, No. 5, pp. 725-735.
  20. Mathew, J., Jabir, A.M,  Singh, A.K,  Rahaman, H. and Pradhan, D.K.,  2010.  A Galois field-based logic synthesis with testability, IET Computers and Digital Techniques, Vol. 4, No. 4, pp. 263 – 273.
  21. Minyu, W., 2010.  Corporate response to an ethical incident.  The case of an energy company in New Zealand, Business Ethics: A European Review, Vol 19, pp. 379-392.
  22. Muthuramalingam, J., 2010. Expectations of student engaged in tertiary education on engineering courses from their teachers of choice, International Education Studies, Vol. 3, No. 2, pp. 112-118.
  23. Prasanna, M.V., 2010.  A study on hydrochemical characteristics of surface and sub-surface water in and around Perumal Lake, Cuddalore District, Tamil Nadu, South India, Environmental Earth Sciences, Vol. 63, No. 1, pp. 34-47.
  24. Prasanna, M.V., 2010.  A study on the impact of landuse pattern in the groundwater quality in and around Madurai region, South India using GIS techniques, Online Journal of Earth Sciences, Vol. 4, No. 1, pp. 27-31.
  25. Prasanna, M.V., 2010.  Hydrogeochemical assessment of groundwater in Neyveli Basin, Cuddalore District, South India, Arabian Journal of Geosciences, Vol.4, No. 1, pp. 319-330.
  26. Prasanna, M.V., 2010.  Statistical analysis of the hydro geochemical evolution of groundwater in hard and sedimentary aquifers system of Gadilam river basin, South India, Journal of King Saud University (Science), Vol. 22, No. 3, pp. 133-145.
  27. Prasanna, M.V., 2010. A novel approach for groundwater budgeting using GIS in a part of Pondicherry Region, India, Journal of Water Resource and Protection, Vol, 2, pp. 585-591.
  28. Rahman, M.E., 2010.  An examination of backing effects on ratings for masonry arch bridges, Special Issue of Journal of World Academy of Science, Engineering and Technology, Issue No. 72, pp. 314-316.
  29. Ramasamy, N.,  2010.  Geochemistry of sandstones from the Upper Cretaceous Sillakkudi Formation, Cauvery basin, Southern India: implication for provenance, Journal of the Geological Society of India, Vol..76, pp.453-467.
  30. Ramasamy, N., 2010.  Evaluation of groundwater quality and its suitability for drinking and agricultural use in Thanjavur city, Tamil Nadu, India, Environment Monitoring and Assessment, Vol. 171, pp.289–308 .
  31. Ramasamy, N., 2010. A geochemical proxy for recognizing sequence stratigraphic surfaces in late cretaceous sediments of Ariyalur area, Cauvery Basin, South India, Gondwana Geological Magazine, Spl. Vol. 12, pp. 225-230.
  32. Shaikh, J., 2010.  Does ownership structure matter in explaining derivatives’ use policy in French listed firms, International Journal of Managerial and Financial Accounting, Vol. 2, No. 2, pp. 196-212.
  33. Shamuganathan, G., 2010.  The influence of personality traits and demographic factors on social entrepreneurship start up intentions, Journal of Business Ethics, Vol. 95, No. 2, pp. 259-282.
  34. Shamuganathan, G., 2010.  The mediating influence of brand associations in determining purchase intention in  a private higher education (PHEI) in Malaysia, Journal of the World Universities Forum, Vol. 3, No. 1, pp. 157-174.
  35. Sia, J.K.M., 2010.  Institutional factors influencing students’ college choice decision in Malaysia: A conceptual framework, International Journal of Business and Social Science, Vol. 1. No. 2, pp. 53-58.
  36. Singh, M., 2010.  Indian business sustainability in the era of globalization, Advances in Management, Vol. 3, No. 5, pp. 57-65.
  37. Tiew, F.N.H., 2010.  Business students’ views of peer assessment on class participation, International Education Studies, Vol. 3, No. 3, pp. 126 - 131
  38. Ting H.T, Abou-El-Hossien K.A, Chua , H.B., 2010. Etch Rate and Dimensional Accuracy of Machinable Glass ceramics in Chemical Etching, Advances in Science and Technology, Vol. No  65, pp. 25-256
  39. Vasant, P., and Barsoum, N., 2010.  Hybrid pattern search and simulated annealing for fuzzy production planning problems, Journal of Computers and Mathematics with Applications, Vol.2, No. 2, pp. 38 - 44.
  40. Vasant, P., Barsoum, N. and Webb, J, 2010.  The optimization of a revenue unction in a fuzzy linear programming model used for industrial production planning, Journal of Applied Computers Science Methods AACSM, Vol.1, No. 2, pp. 65 - 83.
  41. Voon, M.H.F., 2010.  The use of brainstorming and role playing as a pre-writing strategy, The International Journal of Learning, Vol. 17, No. 3, pp. 537-558.
  42. Woldeyohannes, A.D., 2010.  Effect of age of pipes on performance of natural gas transmission pipeline network system, Journal of Applied Sciences, Vol. 11, No. 9, pp. 1612-1617.
  43. Woldeyohannes, A.D., 2010.  Simulation model for natural gas transmission pipeline network system, Simulation Modelling Practice and Theory, Vol.19, pp. 196-212.

Conference Proceedings

  1. Aruchunan, E., & Sulaiman, J., 2010. Half-sweep conjugate gradient method for solving first order linear Fredholm Integro-differential equations. International Conference on Mathematical Applications in Engineering, 3 – 4 August 2010, Kuala Lumpur, Malaysia.
  2. Aruchunan, E., Sulaiman, J., 2010. Repeated Simpson’s 1/3 and backward difference schemes to solve first order linear Fredholm integro-differential equations. Seminar Kebangsaan Sains Komputer dan Matematic, UiTM Sabah, 21 – 22 December 2010, Kota Kinabalu, Sabah.
  3. Barsoum, N., 2010. Application on programming the PIC controller for a sensitive motor speed. The 2010 World Congress in Computer Science, Computer Engineering and Applied Computing, 12 – 15 July 2010, Nevada, U.S.A.
  4. Chidambaram, S and Prasanna M.V., 2010. Application of the Phreeqc Geochemical Model for Groundwater Studies. Training Program on Role of Aqua Chemical Modeling in Water Resources Pollution. 15 - 29 Nov 2010, Annamalai University, India.
  5. Chin, L.F.B., Gorin, A., Twaiq, F., Chua, H.B., 2010. Effect of HZSM-5 Zeolite on Tar Reduction for Biomass Palm Shell Gasification in Fixed Bed Reactor. International Conference on Environmental Science and Technology, 23 - 25 April 2010, Bangkok, Thailand.
  6. Cho, Z.M., Barsoum, N. & Wong, K.I., 2010. Design of wearable device for blood oxygen concentration and temporal heart beat rate. Global Conference of Power Control and Optimisation, 2 – 4 February 2010, Gold Coast, Australia.
  7. Goi, C.L., 2010. Perception of consumer on marketing mix: male vs. female. International Conference on Business and Economics Research, 26 – 28 November 2010, Kuala Lumpur, Malaysia.
  8. Goi, C.L., 2010. The impact of web site attributes on internet users’ online behavior: Malaysian perspective. The 2010 International Conference on E-business, Management and Economics, 28 – 30 December 2010, Hong Kong.
  9. Goi, C.L., 2010. Web sites for e-banking: A study of web sites performance in Malaysia. International Academy of Business and Economics (IABE), 4 - 6 June 2010, Bangkok, Thailand.
  10. Gorin, A, 2010. Asymptotic law for turbulent forced convection from wall surface in packed beds, International Conference on Heat Transfer, Fluid Mechanics and Thermodynamics, 19 - 21 July 2010, Antalya, Turkey.
  11. Hii, L., 2010. Rater competency and compliance to accuracy in conducting performance appraisal in the Malaysian public sector. The 2010 (Summer) International Conference on Asia Pacific Business Innovation and Technology Management, 25 – 27 July 2010, Beijing, China.
  12. Ho, C.L.I., Sim, R.K.S., 2010. Modeling urban runoff for a residential area for stormwater management. World Engineering Congress 2010, 2 – 5 August 2010, Kuching, Sarawak, Malaysia.
  13. Ho, P.L., 2010. The masters’ control: How ownership structure influence the communication of financial ratios. 22nd Asian-Pacific Conference on International Accounting Issues, 7 – 9 November 2010, Gold Coast, Australia.
  14. Ho, P.L., 2010. Determinants of communication of key financial data over turbulent times. 2010 AFAANZ Conference, 4 – 6 July 2010, Christchurch, New Zealand.
  15. Jayakumar, M., 2010. Non-linear wave load model to predict the high frequency deep wave impact forces on offshore structures. The 1st International Conference on Advances in Interaction & Multiscale Mechanics, 30 May – 3 June 2010, Jeju, Korea.
  16. Khor, E.H. & Samyudia, Y., 2010. A comparision of the separation efficiency of dissolved and dispersed oil using microfiltration and ultrafiltration membrane. CHEMECA Conference, 26-29 September 2010, Adelaide, Australia.
  17. Khor, E.H. & Samyudia, Y., 2010. Optimization of dissolved oil separation for produced water analysis. 5th International Symposium on Design, Operation and Control of Chemical Processes (PSE Asia), 25-27 July 2010, Singapore.
  18. Krishnan, A., 2010. An empirical study of the influence of business environment, business strategy and business market position on performance measures and firm performance in Malaysia, International Conference & Colloquium on Excellence in Research on Education, 25 – 28 September 2010, Indore, India.
  19. Kumar, P., 2010. A CFD study of the effect of venturi geometry on wet gas correlations. Chemeca 2010 Conference, 26 – 29 September 2010, Adelaide, Australia.
  20. Lau, H.H., 2010. Application of cold-formed steel built-up sections in building construction. 3rd International Symposium on Cold-Formed Metal Structures, 26 – 27 July 2010, Hong Kong.
  21. Lau, H.H., 2010. Compression tests on cold formed steel lipped c-channel columns – short column. Conference on Buildings and Infrastructural Technology at World Engineering Congress, 2 – 3 August 2010, Kuching, Sarawak.
  22. Lau, H.H., 2010. Load carrying capacity of high strength cold-formed steel built-up box sections. 4th International Conference on Steel & Composite Structure, 21 – 23 July 2010, Sydney, Australia.
  23. Lau, H.H., 2010. Use of thin-gauge galvanized C-purlin sections in long-span roof truss construction. 3rd International Symposium on Cold-Formed Metal Structures, 26 – 27 July 2010, Hong Kong.
  24. Lew, T.Y., 2010. Affective organizational commitment and turnover intention of academics in Malaysia. International Conference on Business and Economics Research, 26 – 28 November 2010, Kuala Lumpur, Malaysia.
  25. Lew, T.Y., 2010. Managing human resources in Sarawak. The organizational support perspectives. 10th Borneo Research Council Conference, 5 – 7 July 2010, Miri, Sarawak.
  26. Lew, T.Y., 2010. Understanding the antecedents of affective organizational commitment and turnover intention of academics in Malaysia: The organizational support perspectives. 24th British Academy of Management Conference, 14 – 16 September 2010, Sheffield, England.
  27. Liew, E.W.T. & Samyudia, Y., 2010. Nonlinear model-based control of non-ideally mixed fermentation processes. International Conference on Biology, Environment and Chemistry, 28 – 30 December 2010, Hong Kong.
  28. Liew, E.W.T., Nandong, J. & Samyudia, Y., 2010. Optimization of fermentation process using a multi-scale kinetics model. 5th International Symposium on Design, Operation and Control of Chemical Processes (PSE Asia), 25-28 July 2010, Singapore.
  29. Liew, E.W.T., K. Perumal & Samyudia, Y., 2010. Computational fluid dynamics of mixing in aerated bioreactors. International Conference on Biology, environment and Chemistry, 28 – 30 December 2010, Hong Kong.
  30. Ling, Y.H. & Shaikh, J.M., 2010. Market value impact of capital investment announcements: Malaysia case. International Conference on Information and Finance, 26 – 28 November 2011, Kuala Lumpur, Malaysia.
  31. Ling, Y.H. & Shaikh, J.M., 2010. Stock market reaction towards capital expenditure announcements: Malaysia case for servicing and manufacturing industry. 13th International Business Research Conference, 22 – 24 November 2010, Melbourne, Australia.
  32. Liu, C., Shaikh, J., Chen, Y., Shi, W., 2010. The impact of telecommunication spending on productivity. 3rd International Conference on Accounting and Finance, 25 – 28 August 2010, Greece.
  33. Nandong, J, Samyudia, Y. & M.O. Tade, Complete partial control design for extractive fermentation process, 9th IFAC International Symposium on Dynamics and Control of Process, 5 – 7 July 2010, Belgium.
  34. Ng, B.Y. & Jayakumar, M., 2010. Experimental study on concrete with low calcium fly ash as mineral admixture. International Conference on Advances in Materials and Techniques in Civil Engineering, 7 – 9 January 2010, Coimbatore, India.
  35. Oo, Z., 2010. Mapping of phase compositions and air-oxidized titanium silicon carbide. International Conference in Materials and Manufacturing Processes, 6 – 7 November 2011, Shenzhen, China.
  36. Oo, Z., 2010. In-situ diffraction study of thermal stability and self-recovery in aluminium titanate. 3rd International Congress on Ceramics, 14 – 18 November 2010, Osaka, Japan.
  37. Oon, K. J. & Yusoff, M.A., “Innovative Ultrasonic Sensors-based 2D Keypad Using Chain Code Algorithm”, IEEE Student Conference on Research and Development (IEEE SCOReD), 13 – 14 December 2010, Putrajaya, Malaysia.
  38. Padmanabhan, E., Mohd Pauzi, A.S, Masnan, M.S, Mokhtar, M.A, Prasanna, M.V., 2010. Ripple mark styles in the Belait formation. National Geoscience Conference, 11- 12 June 2010, Selangor, Malaysia.
  39. Padmanabhan, E., Rajamohan, G., Nazor, S.N., Mokhtar, M.A., Prasanna, M.V., 2010. Impact of spatial variability in microfabrics on heat transfer characteristics of some sedimentary rocks. 1st International Conference on Integrated Petroleum Engineering and Geosciences 2010 (ICIPEG 2010), 15th June 2010, Kuala Lumpur, Malaysia.
  40. Panau, F., Samyudia, Y. & Then, S.P., 2010. Extraction of bioactive compounds from black pepper using supercritical fluid technology. The 13th Asia Pacific Confederation of Chemical Engineering Congress, 5 – 8 October 2010, Taipei, Taiwan.
  41. Prasad, P.W.C., Beg, A. & Singh A.K., 2010. Comparing simulations and graphical representations of complexities of benchmark and large-variable circuits. 2nd International Conference on Education Technology and Computer, 22 – 24 June 2010, Sydney, Australia.
  42. Rani, N.A.S. & Khin, T.M., 2010. Technology and innovation of SMEs in Malaysia. Global Conference on SME & Entrepreneurship 2010, 26 – 27 August 2010, Kuala Lumpur, Malaysia.
  43. Rani, N.S., 2010. Comparative analysis of ecotourism practices in other countries and Malaysia (Borneo). International Conference of the Borneo Research Council, 5 – 7 July 2010, Miri, Sarawak.
  44. Rani, N.S., 2010. Theoretical framework for business survival of tour agents in Miri. Global Conference on SME and Entrepreneurship, 26 – 27 August 2010, Kuala Lumpur, Malaysia.
  45. Rani, N.S.A., 2010. Localizing internet materials to the classroom: A case of small business growth unit in offshore campus. Globalization and Localization in Computer-Assisted Language Learning, 1 – 3 December 2010, Kota Kinabalu, Sabah.
  46. Reddy, M.M. & Gorin, A., El-Hossein, K.A.A., 2010. Surface roughness prediction in the end milling parameters of aluminium nitride ceramic by response surface methodology. International Conference on Advances in Materials and Manufacturing Processes, 6 – 8 November 2010, Shenzhen, China,
  47. Reddy, M.M., Gorin, A., Hossein A.E., 2010, Surface roughness prediction in the end milling parameters of aluminum nitride ceramic by response surface methodology, International Conference on Advances in Materials and Manufacturing Processes, 6 – 8 November 2010, Shenzhen, China.
  48. S. Rajalingam, 2010. Robust part quality by controlling the injection moulding process with 2⁴ fraction factorial design: A case study. The 2010 International Conference on Manufacturing Science and Technology, 26 – 28 November 2010, Kuala Lumpur, Malaysia.
  49. Sabani, N., & Kurnia, S., 2010. The use of learner-development activities in ESL classrooms; the correlation between learner autonomy and students’ English writing proficiency. TARC International Conference on Learning and Teaching, 18 – 19 October 2010, Kuala Lumpur, Malaysia.
  50. Shaikh, J., 2010. Reviewing ABC for effective managerial and financial accounting decision making in corporate entities. Allied Academies International Conference, 14 – 15 April 2010, New Orleans, U.S.A.
  51. Shaikh, J., 2010. Risk assessment: Strategic planning and challenges while auditing – a case study. 12th International Business Summit and Research Conference, 24 – 25 February 2010, India.
  52. Sia, C.S. & Ho, P.L., 2010. Loss avoidance behavior and corporate governance: A study on Malaysian listed firms. 22nd Asian-Pacific Conference on International Accounting Issues, 7 – 9 November 2010, Gold Coast, Australia.
  53. Sia, J.K.M., 2010. A model of higher education institutions choice in Malaysia – a conceptual approach. International Conference on Business and Economics Research, 26 – 28 November 2011, Kuala Lumpur, Malaysia.
  54. Sim, A. & Bujang, S., 2010. Work-family interface of hospitality industry in Malaysia: The mediating effects of work-family conflict and enrichment. Asia Academy of Management 2010 Conference, 12 – 14 December 2010, Macau, China.
  55. Singh, A., 2010. Efficient algorithm for handling dangling pages using hypothetical node. 6th International Conference on digital Content, Multimedia Technology and its Applications, 16 – 18 August 2010, Seoul, Korea.
  56. Singh, M. & Rani, N.S.A., 2010. Where do SMEs stand in environmental sustainability? An overview of past studies. Global Conference on SME & Entrepreneurship 2010, 26 – 27 August 2010, Kuala Lumpur, Malaysia.
  57. Singh, M., 2010. Natural capital & corporate sustainability. International Conference on Strategic Management of Energy, Environment & Disaster for Sustainable Development, 11 – 15 January 2010, Varanasi, India.
  58. Tan, C.K. & Rajalingam, S., 2010. Snakes and electric fences: An innovative approach of teaching curve sketching in undergraduate mathematics. 2nd International Congress on Engineering Education, 8 – 9 December 2010, Kuala Lumpur.
  59. Tan, W.B., Gorin, A.., 2010. Momentum, Heat and Mass Transfer in Packed bed , Curtin University Technology, Science and Engineering Conference, 29 – 30 November 2010, Miri, Sarawak, Malaysia
  60. Tang, F.E., 2010. A study of coastal areas in Miri, Sarawak. World Engineering Congress, 2 – 5 August 2010, Kuching, Sarawak, Malaysia.
  61. Tang, F.E., 2010. Characteristics of pollution dispersion in steady flow in the headland-generated recirculation zone. 6th International Conference on Marine Waste Water Discharges and Coastal Environment, 25 – 29 October 2010, Langkawi, Malaysia.
  62. Tang, F.E., 2010. Characterization of wastewater for small sites. World Engineering Congress, 2 – 5 August 2010, Kuching, Sarawak, Malaysia.
  63. Tang, F.E., 2010. Visualisation of tidal flow near a coastal headland. 6th International Conference on Marine Waste Water Discharges and Coastal Environment, 25 – 29 October 2010, Langkawi, Malaysia.
  64. Tang, F.E., 2010. Utilizing fly ash and bottom ash from Sejingkat coal fired power plant in Kuching for geopolymer mortar. World Engineering Congress, 2 – 5 August 2010, Kuching, Sarawak, Malaysia.
  65. Vasant, P. & Barsoum, N., 2010.Hybrid General Pattern Search and Simulated Annealing For Industrial Production Planning Problems. Global Conference of Power Control and Optimization, 2 – 4 February 2010, Gold Coast, Australia.
  66. Voon, M.H.F., 2010. Brainstorming and role playing as a pre-writing strategy. 17th International Conference on Learning, 6 – 9 July 2010, Hong Kong.
  67. Wong, F.P.S., Siew Y.F. & Chua, H.B., 2010. Biogas production from anaerobic fermentation of palm oil mill biomass. Chemeca 2010 Conference, 26 – 29 September 2010, Adelaide, Australia.
  68. Wong, K.I., 2010. Rapid prototyping of a low-power, wireless, reflectance photoplethysmography system. 2010 International Conference on Wearable and Implantable Body Sensor Networks, 7 – 9 June 2010, Singapore.
  69. Wong, K.I., Barsoum, N. & Cho, Z.M., 2010. Teaching the electronic design and embedded system course with body sensor nodes. The 2nd International Conference on Education, Technology and Computer, 22 – 24 June 2010, Shanghai, China.
  70. Yee, J.H.S., & Shenbaga, K., 2010. Performance of drainage well in electro-osmotic consolidation experiment. Indian Geotechnical Conference, 16 – 18 December 2010, Mumbai, India.
  71. Yusoff, M.A. & Zang, Z., 2010. Design of UWB waveforms for narrowband interferences suppression. 2010 IEEE Asia Pacific Conference on Circuits and Systems, 6 – 9 December 2010, Kuala Lumpur, Malaysia.
  72. Z.X.Cheong & Barsoum, N, 2010. Implementation of energy saving controller for electromagnetic ballast fluorescent lamps. Global Conference of Power Control and Optimisation, 2 – 4 February 2010, Gold Coast, Australia.